Surface Modifications of CuO Doped Carbonaceous Nanosorbents and their CO2 Sorption Properties

2023

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.18321/ectj1493
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

In this study, carbonized apricot stones and rice husk were utilized as feedstock for the synthesis of CuO-loaded carbonized sorbents for the removal of carbon dioxide (CO2) from gas mixtures. The specific surface area of carbonized sorbents increased with increasing carbonization temperature, resulting in a porous structure with enhanced sorption capacity. The presence of pores and the development of porosity in the sorbents were confirmed by SEM images. CuO nanoparticles were well-dispersed on the surface of carbonized sorbents, and the particle sizes were between 60‒100 nm. Chemical interactions between acidic carbon dioxide and basic copper oxide led to improved adsorption properties. The sorption characteristics of the carbonized sorbents were studied under dynamic conditions, and the results showed that CuO-loaded carbonized apricot stones and rice husk had the maximum sorption capacity for CO2, with efficiencies of 98% and 91%, respectively. These findings indicate that carbonized apricot stones and rice husk can be utilized as low-cost and eco-friendly feedstock for the production of efficient CO2 sorbents.