Determination of Optimal Hardfacing Modes for Recovering Electric Motor Shafts

Olga Zharkevich, Oxana Amangeldyevna Nurzhanova, Darkhan Zhunuspekov, Yelena Naboko, Toty Meirbekovna Buzauova, Gulnur Abdugaliyeva, Arman Mateshov, Bessonov, Alexander

2023

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.17559/tv-20220719104215
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The research aims to determine the optimal modes of hardfacing when restoring the shafts of electric motors, taking into account the resulting hardness of the deposited layer for further machining.When conducting a full-scale experiment on hardfacing, samples (200 × 100 × 10 mm) of steel 3 were used, which were preliminarily ground.For hardfacing, such hardfacing materials were used as 1/S -7018, Sv-08G2S.The advantages and disadvantages of various surfacing methods are established.The hardness values of the deposited layer with material 1/S -7018.1 were determined in manual hardfacing, with Sv08G2S material -in semi-automatic hardfacing in a protective gas environment (CO2 -100%), with Sv-08G2S material -automatic surfacing under the layer flux.It has been established that the most effective and economical method of surfacing during the restoration of electric motor shafts is a semi-automatic method in a carbon dioxide environment.Regression analysis was used to build a mathematical model for determining the optimal hardfacing modes, taking into account the hardness of the deposited layer.The correlation coefficients are determined, which indicate a strong linear relationship between the hardness of the deposited layer and such technological parameters as current strength, welding arc voltage, and effective power.For the first time, a mathematical model was obtained for the dependence of the hardness of the deposited layer on the technological parameters of the coating -current strength, voltage, and arc power.The existence of a connection between the technological parameters of surfacing has been established.