Creep of Concrete in Shell Structures: Nonlinear Theory

2023

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.3390/ma16165587
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The creep of concrete is one of the main problems threatening concrete structural development and the stability and safety of structures. However, the nonlinear theory is the key to solving the problem of taking into account the physical and mechanical properties of concrete creep in shell structures. To create such a theory, the original shell is replaced by a continuous equivalent elastic shell. To determine the stress-strain state of the structure, the equations of nonlinear creep and crack growth are derived, and a deformation model of the section is created. The behavior of the structure at all stages of the life cycle is investigated by solving the solving systems of differential equations of equilibrium, motion, and perturbation of the equivalent shell. The values of the ratios of dependence of long-term and short-term critical loads on deformations, forces, cracks, etc., are given. The accuracy of the solution of the developed nonlinear theory is compared with the linear theory of concrete creep as well as experimental data. The results show that, according to the linear theory, for the values for the short term and long term, up to 56% and up to 39% of critical loads are overestimated, respectively. The creep process in practical engineering can be effectively controlled by the results of the proposed theory.