Plasma cutting and exposure to PM2.5metal aerosol in metalworking, Almaty, Kazakhstan, 2020

Denis Vladimirovich Vinnikov, Zhangir Tulekov

2020

Closed access Metadata (CSL-JSON)
DOI 10.1136/oemed-2020-106883
Data confidence 85 high
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Objectives Little is known regarding the metal working subprocesses that determine exposures in the workplace primarily because their segregation from the main process is rather difficult in real-life occupational settings. The present study aimed to identify the subprocesses in a metalworks plant with high personal exposure to particulate matter (PM2.5)metal aerosol in order to plan future risk reduction interventions. Methods A total of eighty 8-hour PM2.5metal aerosol samples from the breathing zone of four workers in each of four major operations (plasma cutting, machine operating, assembling and welding) were collected in a metalwork plant in Almaty in January to June 2020. Minimal, maximal, time-weighted average PM2.5metal aerosol mass concentrations were recorded with TSI SidePak AM520 personal aerosol and analysed using analysis of variance (ANOVA) after normalisation. Results The overall sampling time was 640 hours. Maximal 1 min and geometric mean PM2.5concentrations were 8.551 and 1.7268 mg/m3in plasma cutting; 4.844 and 0.9343 mg/m3in machine operating; 2.993 and 0.6898 mg/m3in assembling; and 2.848 and 0.4903 mg/m3in welding. Using a Tukey-Kramer test after a one-way ANOVA, plasma cutting concentrations were significantly higher compared with all other operations (F-ratio 29.6, p<0.001). The fold-range containing 95% of the total variability (R0.95) from all samples was 12.5. Conclusions The highest PM2.5concentrations were found in plasma cutting, potentially elevating the risk of systemic inflammatory effects.