Removal of Pb2+, Cd2+, and Cu2+ from phosphoric acid solution using the chitosan‐modified natural zeolite

Marzhan Zhan Kussainova, Raissa Michailovna Chernyakova, U.Zh. Jussipbekov, Salih Paşa, Hamdi Temel

2015

Closed access Metadata (CSL-JSON)
DOI 10.1002/apj.1920
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Abstract Sorption ability of the chitosan‐modified natural zeolite for Pb2+, Cd2+, and Cu2+ cations was investigated. The influence of time and concentration of heavy metals on their sorption from concentrated (85% H3PO4) phosphoric acid was determined. At 20 and 40 min of sorption curves, there are a number of maxima probably due to desorption of cations from the sorbent into the acid. According to the results, sorption of the modified zeolite for lead cation is the least in the whole interval of time. In the case of equal concentrations of all cations (CPb = CCd = CCu), sorption of lead, cadmium, and copper was 94.81–95.09%, 96.55–97.50%, and 97.53–98.14%, respectively. Sorption curves in the case of equal Pb2+ and Cd2+, but higher concentrations of Cu2+, are the same for all cations. Sorption of cadmium varies from 95.48% to 97.55%. Copper and lead sorbed in a less amount, in the case of (СРb = СCd < СCu), their sorption in 10 min was 95.42% and 97.55%, respectively. As in the case of equal concentrations of all cations (CPb = CCd = CCu), the sorptions of copper, cadmium, and lead were (92.09–96.93%), (92.13–95.37%), and (91.35–94.45%), respectively, in the case of (СРb = СCu < СCd). Physico‐chemical methods of analysis are as follows: Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray powder diffraction patterns, and Brunauer–Emmett–Teller have shown that natural zeolite is activated without destroying the structure and adsorbs lead, as well as cadmium and copper cations. © 2015 Curtin University of Technology and John Wiley & Sons, Ltd.