Stimulated emission from aluminium anode oxide films doped with rhodamine 6G

2015

Closed access Metadata (CSL-JSON)
DOI 10.1070/qe2015v045n07abeh015533
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The spectral and luminescent properties of the rhodamine 6G dye in a porous matrix of aluminium anode oxide are studied. The films with a highly-ordered porous structure are produced using the method of two-stage anodic oxidation. By means of raster electron microscopy it is found that the diameter of the pores amounts to nearly and the separation between the adjacent channels is almost . The thickness of the films is equal to , and the specific surface area measured using the method of nitrogen capillary condensation is . Fluorescence and absorption spectra of rhodamine 6G molecules injected into the pores of the aluminium anode oxide are measured. It is found that under the excitation of samples with the surface dye concentration by the second harmonic of the Nd : YAG laser in the longitudinal scheme with the pumping intensity , a narrow band of stimulated emission with the intensity maximum at the wavelength appears against the background of the laser-induced fluorescence spectrum. A further increase in the pumping radiation intensity leads to the narrowing of the stimulated emission band and an increase in its intensity. The obtained results demonstrate the potential possibility of using the porous films of aluminium anode oxide, doped with laser dyes, in developing active elements for quantum electronics.