Abstract
Early and reliable detection of P-wave arrivals is critical for seismic monitoring and earthquake early warning, particularly under low signal-to-noise ratio (SNR) and non-stationary noise conditions. This study presents an automatic detection method based on singular value decomposition (SVD) entropy computed in sliding time windows with local signal filtering. Within this framework, the P-wave onset is interpreted as a local structural change in the signal rather than a simple energy increase. SVD entropy captures the redistribution of energy among dominant signal components, providing high sensitivity to the initial P-wave arrival even at moderate and low noise levels (SNR≥2). The method was validated using real seismic data from four regional stations operating under different noise conditions. Analysis of detection parameters revealed strong station dependence. For stations affected by low-frequency drift, polynomial detrending was identified as a necessary preprocessing step to ensure a stable entropy response and reliable detection. The proposed approach achieves detection accuracies of up to 93–98% at SNR≥2, significantly outperforming the classical STA/LTA algorithm and demonstrating performance comparable to modern deep learning methods. Since the method does not require model training or labeled datasets, it provides an interpretable and computationally efficient solution for automatic seismic monitoring. These properties make the proposed approach particularly suitable for real-time seismic monitoring systems and distributed sensor networks operating under limited computational resources. All computational stages were performed at the Farabi Supercomputer Centre of Al-Farabi Kazakh National University. The method requires no model training or labeled data, making it an interpretable, robust, and computationally efficient solution for automatic seismic monitoring and early warning systems.