Analyzing changes in a leach solution oxygenation in the process of uranium ore borehole mining

2021

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.33271/mining15.03.039
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Purpose is to increase uranium content in a PR solution while developing a technique varying oxidation-reduction potential of a leach solution with its oxygenation and identify changes in the oxygenation depending upon sulfuric acid concentration as well as transportation distance of the solution. Methods. A laboratory facility, involving solution tank, pump, Venturi tube, tank to install oxygen analyzer, and a dump tank, has been manufactured under the lab conditions to determine a leach solution oxygenation taking into consideration its delivery rate, sulfuric acid concentration, and temporal preservation of the concentration. Solution flow velocity; the deli-vered solution volume; sulfuric acid concentration; and distance from oxygenation point to a seam changed and varied during the study. Oxygenation was measured with the help of AZ 8403 oximeter; IT-1101 device was used to measure pH value as well as oxidation-reduction potential (ORP). Findings. A technique for a leach solution oxygenation and results of laboratory tests to identify influence of a sulfuric acid as well as transportation distance of a solution on oxygen concentration in the solution have been represented. It has been determined that Venturi tube helps oxygenize a leach solution; in this context, maximum oxygen concentration is achieved if a flow velocity is optimum one. It has been specified that a solution oxygenating depends upon a sulfuric acid concentration decreasing moderately with the increasing distance of the solution transportation. Originality.Following new dependencies have been determined: oxygen concentration in a solution upon a flow velocity and solution volume; and oxygen concentration in a solution upon distance from concentration place and sulfuric acid concentration. Practical implications.A leach solution oxygenation results in the increased oxidation-reduction potential and in the increased content of a useful component in the pregnant solution respectively. The proposed technique is notable for its low capital spending. Moreover, it is integrated easily into the available system being absolutely environmentally friendly.