Analysis of the downlink saturation throughput of an asymmetric IEEE 802.11n-based WLAN

2016

Full text Open access: Green Metadata (CSL-JSON)
DOI 10.1109/icc.2016.7511453
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Frame aggregation (FA) mechanisms improve the throughput of WLANs. In this paper, the effect of the FA mechanism on the throughput of wireless local area networks (WLANs) has been investigated. To this end, we propose an analytical model in order to analyze an IEEE 802.11n network comprised of an access point (AP) and several conventional nodes (CNs), all in the coverage area of each other. With respect to the heavier download traffic compared to the upload one, in our scenario, only the AP uses an FA mechanism and the other nodes use the basic IEEE 802.11 standard. In our proposed analytical model, the maximum downlink (DL) throughput is derived. Regarding the asymmetry among nodes, our analytical model consists of two different queueing networks: one for the AP and the other one for CNs. We verify the accuracy of our analytical results by simulations, i.e., less than 5% mismatch between the analytical and simulation results. We show that there is a tradeoff between the DL saturation throughput and performance of CNs. In other words, the FA improves the AP saturation throughput at the cost of a little degradation of the performance for CNs.