Power system stability improvement considering drive train oscillations of virtual synchronous generator‐regulated type‐4 wind turbines

2022

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.1049/rpg2.12616
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Abstract The type‐4 wind turbine generators (WTGs) can provide inertial frequency response by implementing the virtual synchronous generator (VSG) concept. However, unstable torsional oscillations (TOs) would be induced in the multi‐mass‐spring drive‐train which can destabilize the entire power system. In this study, participation factor analyses are performed for a power system inclusive of a thermal unit and aggregated WTG system. The system's eigenvalues are characterized and the possible detrimental impacts of TOs on the inertia provision process and overall power system stability are demonstrated and the related stability limits are identified. A comprehensive active torsional oscillations damper (CA‐TOD) and a supercapacitor‐based energy storage system (ESS) are presented and discussed to implement the CA‐TOD. A state of charge (SoC) regulator is also employed to set the reference speed difference for the turbine‐generator. Small‐signal studies and electro‐magnetic transient (EMT) simulations are performed to evaluate the functionality of the CA‐TOD and SoC controller and estimate their impacts on the system's dynamics. The robust performance of the CA‐TOD is compared to the band‐pass filter‐based TOD by sweeping key control parameters of the VSG and emulating drive‐train parameter uncertainty. Key results are cross‐verified by EMT simulations of a multimachine power system.