Impregnating Compound for Cement-Concrete Road Pavement

2022

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.3390/cryst12020161
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The paper proposes an impregnation composition for cement concrete roads used as an ice-phobic coating. The composition has been made based on keratin-containing components derived from animal waste with the addition of water-soluble polymers. The main parameter of serviceability of the coating impregnated with the developed composition was assessing the adhesion resistance of ice crust to concrete under the influence of mechanical loads. For this purpose, tests of big specimens (surface area 1925 cm2) in laboratory conditions with application of vibration and impact loads and modelling of thermal stresses were conducted. The test results showed the effectiveness of the ice-coating, as in all experiments, the uncoated specimens showed a greater resistance of the ice crust to mechanical stresses. An additional evaluation parameter was comparing the water absorption capacity of coated and uncoated concrete. The test results showed a significant difference in the water absorption capacity of the uncoated specimens, exceeding the coated specimens by 47%. Due to the results obtained, it will be possible to use the impregnation compound effectively to improve the ice resistance of cement concrete coatings.