Abstract
The problem of tracking the maximum power point for the wind energy conversion system (WECS) is taken into consideration in this paper. The WECS in this article is simultaneously affected by the uncertainties and the arbitrary disturbance that cause the WECSs to be much more challenging to control. A new method to synthesize a polynomial disturbance observer for estimating the aerodynamic torque, wind speed, and electromagnetic torque without using sensors is proposed in this paper. Unlike the previous methods, in this work, both the uncertainties and the disturbance are estimated, then estimations of the uncertainties and disturbance are transmitted to the Linear Quadratic Regulator (LQR) controller for eliminating the influences of the uncertainties and disturbance; and tracking the optimal power point of WECS. It should be noted that the uncertainties in this work are time-varying and both uncertainties and disturbance do not need to satisfy the bounded constraints. The wind speed and aerodynamic torque are arbitrary and unnecessary to fulfill the low-varying constraint or rthtime derivative bound. On the basis of Lyapunov methodology and the sum-of-square technique (SOS), the main theorems are derived to design the polynomial disturbance observer. Finally, the simulation results are provided to demonstrate the effectiveness and merit of the proposed method.