Abstract
Gold in the coarse-grained alluvial sediments of the Irgaity placer deposit (Kazakhstan) occurs predominantly as finely dispersed particles associated with mineral matrices, which limits the efficiency of conventional recovery methods. The proposed processing flowsheet demonstrated that thermal pre-treatment is an effective approach for enhancing ultrafine gold recovery, achieving an overall recovery of 86% from the treated concentrate. The Tescan TIMA “Bright Phase Search” workflow, optimized for gold detection by applying a minimum BSE brightness threshold of 75% and an Au phase filter calibrated using a gold standard, successfully identified gold-bearing grains within the analyzed mounts. Further mineralogical investigations revealed that gold particles ≤10 μm occur as native gold and Au-Ag-As-bearing phases, with silver content reaching up to 14 wt.% in some coarser grains. The significant association of silver with gold-bearing particles indicates the potential for incorporating silver recovery into the processing flowsheet, thereby improving the overall economic value of the deposit. Despite the low average gold grade (0.3–0.4 g/t), the large dimensions of the Irgaity placer deposit (approximately 12 km long, 1.5 km wide, and 60–70 m thick) suggest the presence of a substantial large-volume mineral resource. The combination of extensive mineralized sediments and high recovery achieved through thermal activation supports the potential economic viability of the deposit and warrants further evaluation of its development potential.