Abstract
Within the framework of developing an automated intelligent system for a cold water supply dispatch center, in some cases the object model represents a set of models that have the same external structure (type) but differ in their parameters. In this scientific paper, a comparative analysis based on the transfer function was carried out using simulation modeling and parametric analysis methods. When creating an intelligent water supply system, the operation of the water supply system represents the process of delivering water from a source (for example, a water supply network, a well, or a reservoir) to the consumer (a residential building, facility, or institution). This system consists of several stages. In particular, in multi-storey buildings the process is carried out in accordance with the main operating principle of the water supply system through a central dispatch control center. The scientific article analyzes the variation of water pressure in a residential complex. For the lower zone — the first zone (1–7 floors), the maximum water pressure reaches 4 bar, while for the upper zone — the third zone (14–20 floors), the maximum water pressure reaches 4.5 bar. Based on these parameters, a simulation analysis was performed.