Effective photochemical treatment of a municipal solid waste landfill leachate

2020

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.1371/journal.pone.0239433
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

This work aimed at studying the photochemical treatment of a landfill leachate using ultraviolet light, hydrogen peroxide, and ferrous or ferric ions, in a batch recycle photoreactor. The effect of inorganic carbon presence, pH, initial H2O2 amount (0-9990 mg L-1) as well as Fe(II) (200-600 ppm) and Fe(III) (300-700 ppm) concentrations on the total carbon removal and color change was studied. Prior to the photochemical treatment, a pretreatment process was applied; inorganic nitrogen and inorganic carbon were removed by means of air stripping and initial pH regulation, respectively. The leachate sent subsequently for photochemical treatment was free of inorganic carbon and contained only organic carbon with concentration 1200±100 mg L-1 at pH 5.1-5.3. The most favorable concentrations of H2O2 and ferric ions for carbon removal were 6660 mg L-1 and 400 ppm, respectively. Adjusting the initial pH value in the range of 2.2-5.3 had a significant effect on the organic carbon removal. The photo-Fenton-like process was more advantageous than the photo-Fenton one for leachate treatment. By applying the most favorable operating conditions, 88.7% removal of total organic carbon, 100% removal of total inorganic carbon, 96.5% removal of total nitrogen, and 98.2% color removal were achieved.