PHYSICO-MECHANICAL PROPERTIES AND DURABILITY OF GEOCOMPOSITE BASED ON LOW-PRESSURE POLYETHYLENE AND GEOTEXTILE DURING LONG-TERM OPERATION

2026

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.58805/kazutb.v.1.30-1449
Data confidence 85 high
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The paper presents the results of experimental studies of the physico-mechanical properties of geocomposite used as a covering material for winter blocks of TMF dumps of the Kounrad mine. The changes in the basic strength and deformation characteristics of the material depending on the service life (1 month, 2 years, 3 years) have been studied. The tests were carried out according to GOST standards with the determination of surface density, tensile and tear strength, elongation, yield strength, resistance to aggressive media and repeated freezing and thawing. The results showed that with increasing service life, there is an increase in surface density (from 445 to 604 g/m2) and tensile strength (up to 9.5 kN/m), while reducing elongation. Geocomposite demonstrates high resistance to aggressive environments (up to 96%) and frost resistance, which confirms its durability and suitability for long-term use under conditions of variable climatic loads.