Using Oil Sludge as a Rejuvenator for Reclaimed Asphalt Pavement: Improving Sustainability in Road Maintenance

2024

Full text Open access: Hybrid Metadata (CSL-JSON)
DOI 10.30919/esmm1291
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

This project seeks to create sustainable methods on a modest scale by investigating the potential of oil sludges in the restoration of milled asphalt material.A thermal stability enhancement of reclaimed asphalt pavement (RAP) was determined by thermogravimetric analysis (TGA) following rejuvenation with oil sludge at a concentration of 1%.The residual mass after decomposition up to 700 o C rose from 72.5% to 93.79%.Analyzed using scanning electron microscopy (SEM), the RAP exhibited reduced roughness in the asphalt mixture.This reduction was accomplished by smoothing the surface of the aged asphalt.An experiment found that increasing oil sludge content increases water-absorbing properties, density, and strength in RAP and bituminous binders, while the average RAP gauge depth decreases.Oil sludge reduces bituminous binders' oxidized functional groups C=O and S=O, according to Fourier Transform-infrared spectroscopy (FTIR).Reduce asphaltenes in the binder to increase plasticity, penetration, and bitumen softening temperature.