STUDY OF STRUCTURAL AND MECHANICAL PROPERTIES OF ZIRCONIUM DIOXIDE REINFORCED MAGNESIUM ALUMINATE CERAMICS

Herald of Kazakh-British technical university, 2025

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.55452/1998-6688-2025-22-1-286-297
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

Improving the mechanical properties of technical ceramics is an urgent task of modern ceramic materials science. There is a need to improve the mechanical properties of refractories based on MgAl2O4 spinel, since this spinel is characterized by impeccable resistance to high-temperature corrosion. The work is devoted to studying the microstructure, phase composition and mechanical properties of MgAl2O4-ZrO2 ceramics. Experimental samples were synthesized by the solid-phase method from powder compacts. For a comprehensive study of the microstructure and phase composition, scanning electron microscopy and X-ray diffraction were used. The mechanical properties of the ceramic samples were studied by measuring the strength of tablets in biaxial bending. Reinforcement of magnesium aluminate with zirconium dioxide was carried out to improve the mechanical properties of composite ceramics. It was found that a change in the fraction of the press powder can affect the shrinkage, density and mechanical properties of MgAl2O4-ZrO2 ceramic samples.