Abstract
This article presents the results of a study on the production of active material for supercapacitor electrodes from graphene-like carbon obtained from tea waste, carbonization at a temperature of 550°C, followed by thermochemical activation using potassium hydroxide in a ratio of 1:4 at a temperature of 850°C in a quartz tube furnace. The structure and morphology of the resulting porous graphene-like carbon based on tea waste were investigated using scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), X-ray diffraction, and Raman spectroscopy. The surface area of activated porous graphene-like carbon from tea waste was 2407 m2/g. Electrochemical characterization of the assembled supercapacitor using GLC-TW was performed on an Elins P-40X electrochemical workstation and showed high specific capacitance values of 182 F/g, as well as a Coulombic efficiency of 96% at a current density of 1 A/g and the material also demonstrated a low charge transfer resistance of about 1.5 Ohms. These results highlight the effectiveness of using graphene-like carbon derived from tea waste, demonstrating its potential as a promising material for supercapacitors.