Subsidence, soil suffusion and their influence on the appearance of cracks on concrete slopes of irrigation canals

E3S Web of Conferences, 2024

Full text Open access: Gold Metadata (CSL-JSON)
DOI 10.1051/e3sconf/202459007005
Data confidence 70 medium
How this score is calculated

It is built from checkable properties of the record itself: whether the article has a DOI, how many independent sources confirmed its data, whether the required fields are filled in, and how recent the latest confirmation is. Disagreement between sources and a missing identifier lower it. A value of 80 or above means the record was published without further checking; 60 to 79 means it is published at reduced confidence, with a manual check advisable. A record verified by an editor by hand is never pushed below 90 by a recalculation. This scores our data about the article, not the article itself.

Abstract

The physical and physical-mechanical properties of soils, exceeding permissible hydraulic gradients, rapid filling and emptying of canals, the quality of embankments, linings and others which determine the filtration stability of canals. After completion of construction in the western part at PK47+20, PK202+80, PK218+00, longitudinal cracks appeared in the left slopes. To identify the causes of crack formation, the concrete lining was removed and comprehensive study for the causes of cracks was carried out. Based on the plasticity number, the soils were classified as sandy loams and loamy. The relative subsidence deformation for samples taken from PK 202+80, 218+00 and one sample from PK 47+20 are less than 0.007, those are not subsidence, but the results of second sample taken from PK 47+20 showed from 0.014 to 0.017 which is subsidence soil. The results for the analysis of water samples show the turbidity at PK 185+00 and 218+00, results are 128 mg/dm3 and 11.5 mg/dm3 which exceeds the 6 times than norm, and the results of dry residue are 2026 mg/dm3 and 2030 mg/dm3, which exceed 2 times than the norm.