Surface corrugation of carbon fiber via high-fluence nitrogen ion irradiation

2018

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1088/1742-6596/1121/1/012002
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

SEM and laser goniophotometry were used to study a corrugation of VMN-4 carbon fiber shell of KUP-VM composite after high-fluence 30 keV N 2 + ion irradiation at temperatures range from 100 to 600°C. It has been found that the angles of an inclination of corrugated structure increase with temperature so that at temperature ∼270 °C reach maximum values ∼40°, staying at this level at subsequent temperature elevation up to 600 °C. Spatial period of corrugations alternation is about 1 µ m for temperatures range 100-200°C and 0.6 µ m for higher temperatures. Qualitative difference of nitrogen from noble gas temperature dependences of a corrugation is connected with a nitrogen chemical activity and creation of C-N bonds due to implantation.