Way to Protect Electrical Wires Against the Break under the Strong Wind

2020

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1088/1742-6596/1626/1/012056
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Abstract In many countries in the world the strong wind can break wires very easily. In this case many regions and very important objects will be without of the electrical energy and lighting. To find quickly the place where this situation had happened it takes many hours. It is a great problem. Everybody knows that it is rather difficult to reach this damaged place (maybe in the forest or among the high hills). Strictly any repair takes usually many hours too. That’s why it is needed to find the simplest method to defend any long wires against their break under the strong wind. In this situation if the strong rushes of the wind begin to swing wires intensively, they cannot sustain such overloads too long. Moreover, the resonance phenomenon in these oscillations will be without fail and breaks wires very quickly. In this article there is a new way how to protect any wires against the break using only several hard rods fixed firmly on the wires. How it can be done it is described in detail below and some of recommendations including the results of experiments are shown also.