Way to Protect Electrical Wires Against the Break under the Strong Wind

2020

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.1088/1742-6596/1626/1/012056
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Abstract In many countries in the world the strong wind can break wires very easily. In this case many regions and very important objects will be without of the electrical energy and lighting. To find quickly the place where this situation had happened it takes many hours. It is a great problem. Everybody knows that it is rather difficult to reach this damaged place (maybe in the forest or among the high hills). Strictly any repair takes usually many hours too. That’s why it is needed to find the simplest method to defend any long wires against their break under the strong wind. In this situation if the strong rushes of the wind begin to swing wires intensively, they cannot sustain such overloads too long. Moreover, the resonance phenomenon in these oscillations will be without fail and breaks wires very quickly. In this article there is a new way how to protect any wires against the break using only several hard rods fixed firmly on the wires. How it can be done it is described in detail below and some of recommendations including the results of experiments are shown also.