On thermal stability of antimony thin films for solar cells applications

Recent Contributions to Physics, 2019

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.26577/rcph-2019-1-1093
Достоверность данных 85 высокая
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Antimony has received considerable attention due to structural archetype for a variety of sulfide and sulfosalt minerals. In this work Sb thin films with thickness of ~ 300 - 400 nm were grown by radio frequency magnetron sputtering, in order to use as a precursor to synthesize chalcogenide semiconductors for solar cells applications. It was shown the influence of annealing temperatures to the structure of the as-deposited Sb films. Antimony thin films were deposited on a glass substrate and subsequently were annealed at different temperatures 300°C, 400°C, 500°C in argon gas ambient. Structural characterization of the films analyzed by Raman scattering spectroscopy, two different excitation wavelengths were used: 532, 632.8 nm. Raman bands both the symmetric (A1g) and nonsymmetrical (Eg) phonons were identified. Transmittance measurements and morphology studies of the films showed stability of annealed films at temperatures at 400 °C and the results of Raman spectroscopy showed their high polycrystalline structure.