On thermal stability of antimony thin films for solar cells applications

Recent Contributions to Physics, 2019

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.26577/rcph-2019-1-1093
Деректер сенімділігі 85 жоғары
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Antimony has received considerable attention due to structural archetype for a variety of sulfide and sulfosalt minerals. In this work Sb thin films with thickness of ~ 300 - 400 nm were grown by radio frequency magnetron sputtering, in order to use as a precursor to synthesize chalcogenide semiconductors for solar cells applications. It was shown the influence of annealing temperatures to the structure of the as-deposited Sb films. Antimony thin films were deposited on a glass substrate and subsequently were annealed at different temperatures 300°C, 400°C, 500°C in argon gas ambient. Structural characterization of the films analyzed by Raman scattering spectroscopy, two different excitation wavelengths were used: 532, 632.8 nm. Raman bands both the symmetric (A1g) and nonsymmetrical (Eg) phonons were identified. Transmittance measurements and morphology studies of the films showed stability of annealed films at temperatures at 400 °C and the results of Raman spectroscopy showed their high polycrystalline structure.