Functional properties of multilayer vacuum-arc TiN/ZrN coatings

2016

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1088/1757-899x/110/1/012056
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Nanostructured multilayer Ti/ZrN coatings were synthesized by vacuum-arc deposition with a number of layers 134-533 and an average thickness 20-125nm of layers. A good planarity was revealed resulting in a range of nanometer layer from plasma streams in a reactive environment. Phase-structural changes mechanisms were established as a model of critical operating coatings' conditions of in the surface layers under the action of an aggressive oxygen atmosphere at high temperature (700°C). The thickness parameter effect on its hardness of the multilayer system was shown. It was found that the maximum hardness of 42 GPa and the lowest abrasion of coating 1,3 × 10-5 mm3 × H-1 × mm-and counterbody 1,9 × 10-6 mm3 × H-1 × mm-1 inherent in TiN/ZrN system with the smallest layer thickness of 20 nm in the period. The results are explained by the influence of the size factor interphase boundaries magnified in a multilayer system with a nanometer thick layers.