Phase Composition and Structure-Formation of the Low-Clinkered Floured Cements

2014

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.18321/ectj2
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

We have carried out studies on the production of low-clinkered floured cements (LCFC) on the basis of natural and technogenic waste. The research on optimizing the compositions, strength, durability and performance properties of low-clinkered floured cements (LCFC) was carried out. Therefore, we studied the new products in the process of hydration of mechanically activated multi-component cements in the presence of technogenic wastes of the industry (waste of limestone crushing at opencast mines, metallurgical and phosphoric slag) and surface-active reagents (SAR) (superplasticizer S-3); as well as the development of compositions of high-strength and technological sorts of cement concretes. Thus, the low-clinkered floured cements developed by us based on industrial technogenic waste that meet the modern requirements, i.e. they improve physical-mechanical characteristics of the material and positively influence the ecological situation and allow decreasing the cost of final product. The physico-chemical research of the processes of hydration of low-clinkered floured cements with additive of superplasticizer S-3 were carried out by modern methods using X-ray diffract-meter D8ADVANCE (Bruker company) with Cu-radiation and synchronous thermo-analyzer STA 409 PC Luxx (Netzsch, Germany) at exposure mode of 10 Вє/min in the platinum crucibles in the air conditions.