Phase Composition and Structure-Formation of the Low-Clinkered Floured Cements

2014

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.18321/ectj2
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

We have carried out studies on the production of low-clinkered floured cements (LCFC) on the basis of natural and technogenic waste. The research on optimizing the compositions, strength, durability and performance properties of low-clinkered floured cements (LCFC) was carried out. Therefore, we studied the new products in the process of hydration of mechanically activated multi-component cements in the presence of technogenic wastes of the industry (waste of limestone crushing at opencast mines, metallurgical and phosphoric slag) and surface-active reagents (SAR) (superplasticizer S-3); as well as the development of compositions of high-strength and technological sorts of cement concretes. Thus, the low-clinkered floured cements developed by us based on industrial technogenic waste that meet the modern requirements, i.e. they improve physical-mechanical characteristics of the material and positively influence the ecological situation and allow decreasing the cost of final product. The physico-chemical research of the processes of hydration of low-clinkered floured cements with additive of superplasticizer S-3 were carried out by modern methods using X-ray diffract-meter D8ADVANCE (Bruker company) with Cu-radiation and synchronous thermo-analyzer STA 409 PC Luxx (Netzsch, Germany) at exposure mode of 10 Вє/min in the platinum crucibles in the air conditions.