Effect of Water-Air Microemulsion of Flotation Agent Solution on Flotation of Polymetallic Sulfide Ores

2022

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.3390/min12121612
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The enrichment of polymetallic sulfide ore is a complex task. Fine grinding is carried out to reveal useful minerals, resulting in the formation of microparticles. It is difficult to achieve the floatation of microparticles and fine useful minerals are lost with flotation tailings. The problem of microparticle flotation can be solved by using air bubbles smaller than 50 µmin for the flotation process. Water-air microemulsion (WAME)of a frothersolution obtained using the generator was used as microbubbles. The effect of WAME on flotation was studied on polymetallic ores and gold-bearing ore from Kazakhstan deposits.The use of WAMEin the processing of polymetallic ore allowed for themaintenance of the quality of rougher concentrates, to increase the copper extraction in Cu-Pb rougherconcentrate by 7.41%, of lead by 5.98% in the copper-lead flotation cycle (Cu-Pb-Zn-Fe ore), copper extraction in Cu-Mo rougherconcentrate by 5.2%, and molybdenum by 4.7% in the copper-molybdenum flotation cycle (Cu-Mo ore). The indicators of flotation gold extraction into the gold-containing concentrate significantly improved in comparison with the basic mode when using the generator in rougher and scavenger flotation cycles: the quality increased by 5.3 g/t, and the extraction increased by 4.27%.