Dust from Gas Cleaning of Ferrochrome Production and Its Disposal Ways

2026

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.52209/1609-1825_2026_1_24
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The article is devoted to the processing of chromium-containing dust caught by the wet method from the exhaust gases of a ore-thermal furnace during the smelting of carbonaceous ferrochrome. Dust is characterized by low content of chromium (III) oxide and high content of magnesium oxide. As you know, a high content of magnesium oxide negatively affects the properties of slag in the smelting of ferrochrome. In this regard, the best way to process dust is to obtain a chromium concentrate by removing magnesium and other metals from it. Existing methods of processing chromium-containing waste show the possibility of using an inexpensive reagent for this purpose – sulfuric acid. The aim of the authors of the article was to test the possibility of using sulfuric acid for dust processing. The laboratory experiments conducted by the authors also showed the possibility of obtaining a chromium concentrate from dust using sulfuric acid as a reagent.