Creating cdte nanoclusters in SiO2/Si track templates with the use of two electrolyte types

2019

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.1063/1.5134157
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

This paper presents the results of the study of CdTe nanoclusters prepared by electrochemical deposition using sulphate and chloride solutions. The SiO2/Si track templates were used as nanoporous templates. The а-SiO2/Si-n track template was obtained by irradiation with xenon ions with an energy of 200 MeV, with fluences of 107–108 ions/cm2. The surface of the deposited samples was examined using scanning electron microscopy. To identify the crystal structure of CdTe nanoclusters, an X-ray structural analysis was carried out to form cadmium telluride nanocrystals of the hexagonal phase (wurtzite) together with the amorphous phase. Calculations of crystallite sizes showed that annealing CdTe samples at 100°C leads to changes in nanocrystallites and to increase in the degree of crystallinity with the dominance of the amorphous phase.