CORROSION BEHAVIOR OF MILD STEEL IN SODIUM SULFATE SOLUTION IN PRESENCE OF PHOSPHATES OF DIFFERENT COMPOSITION

2024

Толық мәтін Ашық қол жеткізу: Gold Метадеректер (CSL-JSON)
DOI 10.59957/jctm.v59.i2.2024.16
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Corrosion of mild steel in sodium sulfate solutions (1000 mg SO42- L-1) in the presence of various phosphateinhibitors was studied gravimetrically. Studies were performed under static conditions at room temperature. The known sodium polyphosphate inhibitor has been found to have low efficacy under these conditions. The inhibitor efficiency of its does not exceed 30.5 % at a concentration of 100 mg P2O5 L-1. It has been shown that a more effective inhibitor is calcium-manganese polyphosphate (Са, Mn)(PO3)2 obtained on the basis of manganese ore enrichment wastes of the Zhayrem deposit. The inhibitor efficiency of its already at a concentration of 20 mgP2O5 L-1 is 47.3 %. At a concentration of 100 mgP2O5 L-1, the inhibitor efficiency (Са, Mn)(PO3)2 is 96.2 %. Electrochemical tests confirmed the results of the gravimetric study. Infrared spectroscopic analysis showed that phosphate protective coatings were formed on the steel surface in solutions of sodium sulfate with additives of calcium-manganese polyphosphate.