Discharge Initiation in Globus-M2 and KTM Tokamaks Using a Coaxial Plasma Jet Accelerator

2021

Жабық қол жеткізу Метадеректер (CSL-JSON)
DOI 10.1134/s1063780x21080109
Деректер сенімділігі 70 орташа
Бұл баға қалай есептеледі

Ол жазбаның өзінің тексерілетін белгілерінен құралады: мақаланың DOI-і бар ма, оның деректерін қанша тәуелсіз дереккөз растады, міндетті өрістер толтырылған ба және соңғы растау қаншалықты жаңа. Дереккөздер арасындағы алшақтық пен идентификатордың болмауы бағаны төмендетеді. 80-нен бастап мән жазбаның қосымша тексерусіз жарияланғанын, 60-тан 79-ға дейін — оның сенімділігі төмен күйде жарияланғанын және қолмен тексеру ұсынылатынын білдіреді. Редактор қолмен тексерген жазбаны қайта есептеу 90-нан төмен түсірмейді. Бұл — мақаланың өзіне емес, ол туралы деректерімізге берілген баға.

Аңдатпа

Abstract Studies were performed on the possibility of using the coaxial plasma jet accelerator to facilitate breakdown and the plasma current start-up in the Globus-M2 and KTM tokamaks. The results of experiments on the jet injection into the Globus-M2 tokamak with a magnetic field of 0.7 T showed that the discharge current rise began 1–2 ms earlier than it did in experiments using gas puffing and inductive breakdown of the working gas. In this case, the breakdown voltage decreased approximately 2 times. The results of experiments on plasma jet injection through the equatorial diagnostic duct into the KTM tokamak with a magnetic field of 0.9 T showed that the gas breakdown occurred up to 6 ms earlier than the breakdown initiated using the inductive method. In this case, the loop voltage decreases approximately 1.5 times. In almost all shots using the accelerator, the gas breakdown occurred, while in its absence, sometimes the gas breakdown could not be obtained.