Аннотация
As is known, boriding is carried out to increase the wear resistance and corrosion resistance of iron-carbon alloys. Along with high hardness, borides, unfortunately, have very high fragility and high refractoriness. An effective way to counter the fragility of boride layers is to form a composite structure consisting of inclusions of solid borides in a more plastic matrix. Such coatings can be obtained by volumetric heating in a muffle furnace using a boron paste that besides a mixture of iron and boron powders contained ammonium hydroxide and activated carbon with or without liquid glass. Boriding of a surface is carried out at high temperatures =1000 °С for 5 minutes. It is experimentally found that the microhardness of the surface layer increased by about 30% compared with the microhardness of the substrate, and that the thickness of the boride layer depends on the presence of liquid glass in the coating. It has been established that specially calculated proportions of ammonia, liquid glass, and charcoal contribute to the formation of an extensive diffusion zone of iron borides, the formation of which is due to the anomalously high diffusion mass transfer of boron into the matrix.