Influence of slit sizes on the interaction structure of supersonic turbulent air flow with a multi-component injection jet in a channel

2018

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.26577/ijmph.2018.v9i2.264
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The supersonic air flow in a flat channel with transverse injection of a turbulent hydrogen jet through a slit in the bottom wall is numerically simulated. The solution of the initial Favre-averaged Navier-Stokes equations closed by the k-ω turbulence model is performed using an algorithm built on the basis of the WENO scheme. The interaction of a shock-wave structure with boundary layers on the lower and upper walls under conditions of an internal turbulent flow is investigated, namely, the effect of the width of the jet slit is studied. It is found that, in addition to the known shock-wave structures arising from the interaction of the incident flow with the transverse jet and the interaction of the main shock wave with the boundary layers near the walls, there is an additional system of shock waves and separation of the flow on the bottom wall at some distance from the jet downwards flow. Comparison with experimental data showed satisfactory agreement. undefined undefined Звуковая функция ограничена 200 символами Настройки : История : Обратная связь : Donate Закрыть