Study on vacuum drying kinetics and processing of the Lonicera japonica Thunb. aqueous extracts

LWT, 2022

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1016/j.lwt.2022.113868
Достоверность данных 85 высокая
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

To reveal the vacuum drying mechanism of aqueous extracts and develop vacuum drying processing to provide theoretical guidance for Lonicera japonica Thunb. aqueous extracts, the effects of vacuum pressure (10, 15, 20, 25, 30 kPa), drying temperature (80, 90, 100, 110, 120 °C), and material thickness (2, 4 mm) of vacuum drying on the moisture ratio, drying rate, material temperature, moisture effective diffusivity, activation energy, content and distribution of moisture, water-solubility, flowability, antioxidant capacity, and the contents of chlorogenic acid and galuteolin contents were investigated. Results showed that the drying mechanism of the aqueous extracts was different from that of conventional porous media, which contains drying stagnation and boiling phenomenon. The initial bound water content of the aqueous extracts was 100%, and the bound water will not convert to free water during vacuum drying. The best vacuum drying process for the L. japonica Thunb. aqueous extracts was 30 min, 4 mm, 120 °C and 10 kPa.