Method for automatic compensation of a single-phase earth fault

2021

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.11591/eei.v10i3.3021
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The paper demonstrates improving the reliability of power supply and operating safety of power receivers in electric networks of 6-10 kV, by controlling the neutral mode in extended electric networks of 6-10 kV with capacitive earth fault currents above 15 A. The purpose of the study is to increase the reliability of power supply and the safety of operation of power receivers in such electric networks, the establishment of patterns in controlling the neutral mode in extended 6-10 kV electric networks with capacitive earth fault currents above 15 A, as well as the development of a method and device automatic detection of single-phase earth fault current. Grounding methods and neutral modes in electric networks with a voltage of 6-10 kV are considered. The method and device for automatically determining the current of a single-phase earth fault were developed. In the result, the relationship between the active and inductive components of the neutral current during series RL grounding of the network Ia/IL=(0.5÷0.3) was established, which ensures reliable operation of the SPEF protection of both current and directional principles including the changes of capacity abruptly networks caused by switching outgoing lines.