INVESTIGATION AND MANAGEMENT OF FIRE RISKS AT SITES WITH APPLICATION OF TRANSLUCENT BUILDING STRUCTURES

2020

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.32014/2020.2518-170x.131
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

On the base of analyses on the development of the construction industry as well as fires occurring in Kazakhstan, the article justifies the areas of fire prevention related to technical regulation that is the certification of materials, construction structures and engineering systems. The translucent building structures have increasing application in modern construction techniques. For such structures, the most vulnerable indicator is the fire resistance limit. A technical solution is offered to increase this indicator by using water irrigation. On the base of existing international and national regulatory documents, a number of methods has been developed for experimental determination of the actual fire resistance limit by cooling of structures with water in case of fire. Large-scaled fire researches have been carried out to determine the actual limit of fire resistance of the translucent partition made of tempered glass "Float" with the thickness of 12 mm, M1 grade both in the presence of water irrigation and in the absence thereof. The tests were carried out under standard and actual fire conditions. Optimal parameters of water irrigation are determined. On the base of research results, it is proposed to improve the construction standards in this field as well as methodological documents in the field of certification tests.