Аннотация
Abstract Theoretical studies of the process of round cross-section billets pressing in equal-channel step matrices of various designs by modeling are carried out. It was found that the backpressure created by the narrowing of the matrix channels has a favorable effect on the stress-strain state of the metal, which in turn allows for better processing of the structure of the deformable metal. It is also found that when using an equal-channel step matrix with narrowing channels, the deformation force increases, which cannot be attributed to the positive sides of these matrix designs. It was found that the most optimal results were obtained when using an equal-channel step matrix with a narrowing of the intermediate channel.