APMP key comparison of DC voltage at 1.018 V and 10 V

2017

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1088/0026-1394/54/1a/01012
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

A key comparison of DC voltage at 1.018 V and 10 V has been conducted from 2009 to 2011 between APMP member laboratories and the BIPM. All participants' results (except one) are within the uncertainty of comparison reference value and also within the uncertainty of the CIPM key comparison reference value of the BIPM.EM-K11.3, approximately 0.08 μV/V for 10 V and 0.2 μV/V for 1.018 V ( k =2). The result of the comparison is supposed to successfully provide participating laboratories with the opportunity to compare national standards within the region, and to support participants' entries in Appendix C of the Mutual Recognition Arrangement. Main text To reach the main text of this paper, click on Final Report . Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/ . The final report has been peer-reviewed and approved for publication by the CCEM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).