Magnetic Fe3O4-Ag0 Nanocomposites for Effective Mercury Removal from Water

2020

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.3390/su12135489
Достоверность данных 85 высокая
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

In this study, magnetic Fe3O4 particles and Fe3O4-Ag0 nanocomposites were prepared by a facile and green method, fully characterized and used for the removal of Hg2+ from water. Characterizations showed that the Fe3O4 particles are quasi-spherical with an average diameter of 217 nm and metallic silver nanoparticles formed on the surface with a size of 23–41 nm. The initial Hg2+ removal rate was very fast followed by a slow increase and the maximum solid phase loading was 71.3 mg/g for the Fe3O4-Ag0 and 28 mg/g for the bare Fe3O4. The removal mechanism is complex, involving Hg2+ adsorption and reduction, Fe2+ and Ag0 oxidation accompanied with reactions of Cl− with Hg+ and Ag+. The facile and green synthesis process, the fast kinetics and high removal capacity and the possibility of magnetic separation make Fe3O4-Ag0 nanocomposites attractive materials for the removal of Hg2+ from water.