Justification of the parameters of ring models in the decomposition of the ventilation network of an extended metro line for the calculation of air distribution

2022

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.33764/2618-981x-2022-2-3-214-220
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The piston effect of trains on air distribution and air exchange in tunnel and passenger structures of the metro with a single-track tunnel is in second place after the action of mechanical tunnel ventilation. When the tunnel fans are turned off (for example, during the cold season in an area with a sharply continental climate), almost the entire ventilation load is provided by the piston action. Since all elements of the metro ventilation network are connected by tunnels under the generally accepted scheme of longitudinal ventilation, the mutual influence of the ventilation modes of neighboring metro sections is very significant. Therefore, in order to obtain the correct result of air distribution modeling, at least 8 runs with stations should be included in the calculation scheme, which leads to increased requirements for computing power and calculation time. The article considers the decomposition of an extended metro line using ring models and justifies the number of calculated sections with stations for different train frequencies. A comparison of the calculation results for the ring and linear models is given. Calculations are performed using network methods for calculating air distribution.