Instrumental Solid Fuel Quality Control by a Neutron Method

2021

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.3103/s0361521921060112
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Abstract The results of studies on solid fuel quality control by neutron gamma radiation spectrometry of the inelastic scattering of fast neutrons on carbon and the radiation capture of thermal neutrons by ash-forming elements are presented. Close correlations between various qualitative characteristics (heat of combustion, carbon content, and ash content) were established. The inversive alternating-sign dependence of the sensitivity to the heat of combustion on the coal layer thickness was found. The thickness boundary values were determined at which the maximum and minimum sensitivities were observed. The results of measurements of the intensity of gamma radiation in the region of an analytical line of carbon (~4.43 MeV) were optimized to provide satisfactory sensitivity to the heat of combustion and a minimum disturbing effect of the variable bulk density of coal.