Optimization of the Liquid Scintillator Composition

2017

Полный текст Открытый доступ: Hybrid Метаданные (CSL-JSON)
DOI 10.22323/1.282.0775
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Nowadays, many particle detectors use liquid scintillator (LS) as a detection medium.In particular, Water-based Liquid Scintillator (WbLS) that is a new material currently under development.It is based on the idea of dissolving the organic scintillator in water using special surfactants.This material strives to achieve the novel detection techniques by combining the Cherenkov and scintillation light, as well as the total cost reduction compared to pure liquid scintillator.An important part of either the pure LS or WbLS production is to choose the right fluor and shifter and their concentrations.The choice affects the spectral distribution of the light output and the detection efficiency as each photodetector has its own spectral sensitivity region.This work presents the results of the study on the pseudocumen (PC) based LS with the PPO and POPOP/MSB as a fluor and shifters of choice.Both the total light yield and the spectral differences in the outputs with different amounts of components are shown.This study can be applied to plastic scintillators as well.