Nanoscale Structure of Positive Electrodes for Lithium-Ion Batteries with Graphene-Based Additives According to Small-Angle Neutron Scattering

2023

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1134/s1027451023020246
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

Abstract In this paper, we continue the adaptation of neutron-scattering methods for studying the microstructure of electrode materials of lithium-ion batteries in order to improve their specific energy storage. The effect of conductive carbon additives (graphene and graphene oxide) on the porous structure of electrodes with various bases, including LiFePO4, Li4Ti5O12, and LiNiMnCoO2, is studied via the small-angle scattering of thermal neutrons. To separate the scattering by closed and open pores, the electrodes are wetted with a typical liquid electrolyte with a deuterated liquid carrier (dimethyl carbonate), which leads to the matching of scattering by open pores. It is established that electrically conductive carbon additives change the porosity of the electrode to varying degrees and affect the wettability of materials due to both varying degrees of penetration into the pores of the initial material and the effect on the initial matrix. A universal effect on the dispersion of a polymer binder (polyvinylidene fluoride) is also found.