3D simulation of heat and mass transfer for testing of “clean energy” production technologies

2021

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1134/s0869864321020104
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The paper describes a study of the influence of Overfire Air (OFA) technology on heat and mass transfer parameters for a furnace chamber in the BKZ-75 boiler at the Shakhtinsk power plant (Kazakhstan); this plant is fueled with Karaganda high-ash coal. The computer simulation methods were applied for studying different air supply regimes through the air injectors operating in OFA design with different contributions: 0 (reference variant), 5, 10, 15, 18, and 20 %. The computer simulation of in furnace processes offers the distribution for total velocity vector, tempertaure field, NO 2 concentration field for the entire furnace and the exit zone. The study demonstrated that the operation with air injection at 18 % of OFA is optimal for combustion of high-ash coal. This operation mode offers a higher tempertaure at the flame core and a gradual tempertaure reduction at the chamber outlet; the latter feature is significant for chemistry of combustion products. The boiler under this operation mode offers a reduction of nitrogen oxide NO 2 emissions from the furnace.