Determination of thermally stressed state of rod elements of variable cross section under the impact of a lateral heat flow, heat exchange and surface thermal insulation

E3S Web of Conferences, 2020

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.1051/e3sconf/202021601073
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

A horizontal bar of limited length is considered. The radius of the bar changes linearly along its length. The cross-sectional area of the left end is larger than the right. The lateral surface of the investigated rod is completely insulated. The heat flux is applied to the cross-sectional area of the left end. Heat exchange with the environment takes place through the cross-sectional area of the right end of the rod. The work determines the field of temperature distribution, displacement, three components of deformation and stress, provided that both ends of the rod are rigidly fixed. The amount of bar elongation is also determined when one end of the bar is fixed and the other is free. In case when the two ends of the bar are fixed, the value of the resulting axial compressive force is calculated. In this study the fundamental laws of conservation of energy were used.