Methods of Reducing the Front Performance Flame at the Underground Mines Works

2018

Полный текст Открытый доступ: Gold Метаданные (CSL-JSON)
DOI 10.13005/ojc/340645
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

The aim of the study was to develop methods to reduce the penetration ability of the flame front and red-hot striking elements that propagate in the confined space of mines. In the article is considered a method for localizing explosions of a methane-dust mixture in coal mines, by creating an aqueous barrier (increased density) in the propagation path of the flame front and incandescent particles, using a high-energy pyrotechnic composition based on nanoaluminum. The optimal pyrotechnic composition contents of ammonium nitrate - 50%, smokeless powder - 45%, magnesium - 3% and nanoaluminum - 2%. This composition punched the target to a depth of 6.5 mm with a barrier thickness of 50 mm. Water cannon with a nozzle with a diameter of 80mm, allows to localize the spread of the flame front.