Thermally-controlled coiled polymeric wire as a novel variable elastic element

2017

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1109/aim.2017.8014061
Достоверность данных 70 средняя
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

In this work, we present a thermally-controlled coiled polymeric wire as a novel variable stiffness element for robotics applications. We characterized the stiffness behavior of a single twisted nylon wire with 1 mm diameter at different operating temperatures between 25 °C to 50 °C. We observed a linear relationship between the temperature and the stiffness of the nylon wire. This is promising since it would facilitate straightforward adjustment of spring behavior in variable stiffness actuated systems. In order to see the stiffness modulation through temperature change, we conducted dynamic tests on a single joint mechanism with two nylon springs connected in an antagonistic configuration. Specifically, the nylon springs were immersed in water and the temperature was controlled using a Peltier cell. Experimental results indicate that the natural frequency and the damping ratio of the second order system are proportional and inversely proportional to the temperature, respectively.