Thermal Performance Simulation of a Heat Pump Assisted Solar Desalination System for Kazakhstan Climatic Conditions

2018

Закрытый доступ Метаданные (CSL-JSON)
DOI 10.1080/01457632.2018.1451246
Достоверность данных 85 высокая
Как считается эта оценка

Складывается из проверяемых признаков самой записи: есть ли у статьи DOI, сколько независимых источников подтвердили её данные, заполнены ли обязательные поля и насколько свежо последнее подтверждение. Снижают оценку расхождения между источниками и отсутствие идентификатора. Значение от 80 означает, что запись опубликована без дополнительной проверки; от 60 до 79 — что она опубликована с пониженной достоверностью и ручная проверка желательна. Запись, выверенную редактором вручную, пересчёт не опускает ниже 90. Это оценка наших данных о статье, а не оценка самой статьи.

Аннотация

A numerical model has been proposed in this research work for predicting the energy performance of a heat pump assisted regenerative solar still using phase change heat storage materials such as paraffin wax and hydrate salt. The numerical model is based on energy and mass balance. The performance was simulated for Fort Sherchenko town in Kazakhstan. The performance comparison between the conventional solar still and heat pump assisted regenerative solar still with and without phase change materials are presented. Moreover, the influence of two different phase change materials on thermal performance of a heat pump assisted regenerative solar still are described. The numerical simulation results showed that heat pump assisted regenerative solar still is more energy efficient and produces better productivity when compared to the conventional simple solar still. The use of hydrate salt phase change heat storage material was found to be a good option for enhancing the performance of a heat pump assisted regenerative solar still.